Cerakote Corvette Yellow H-144 Ceramic Coating 1PT/Bottle

Cerakote Corvette Yellow H-144 is a high-gloss bright yellow shade of the oven-cured ceramic polymer coating from the Cerakote® H Series by NIC Industries, USA. It features vivid and full color with a glossy finish. Based on unique ceramic-polymer composite technology, H-144 forms a coating with a thickness of approximately 2.0–3.0 mils and specific gravity of around 1.41, while its 60° gloss value is roughly 73. A catalyst is required for application, and the coating must be filtered through a 150-mesh screen (SE-276). The recommended curing temperature ranges from 250–300°F (approx. 120–150°C). It can be cured for 2 hours at 180–250°F or 1 hour at 300°F. The coating combines flexibility and abrasion resistance, and features good resistance to most solvents and chemicals.

Cerakote Corvette Yellow H-144 High-saturation matte yellow finish with uniform, rich color, excellent color fastness, and high visual distinctiveness

Cerakote Corvette Yellow H-144 Ceramic coating with excellent adhesion (5B rating), resistant to peeling and flaking, compatible with various metal substrates

Cerakote Corvette Yellow H-144 Hard ceramic coating surface, scratch- and wear-resistant, withstands impact and abrasion in daily use

Cerakote Corvette Yellow H-144 Good corrosion resistance, protects substrate from moisture and salt spray exposure

Cerakote Corvette Yellow H-144 Resistant to a wide range of solvents and industrial chemicals, including engine oil and cleaning agents

Cerakote Corvette Yellow H-144 Moderate flexibility, resists cracking during bending operations

Cerakote Corvette Yellow H-144 Good UV weathering resistance, minimal fading or chalking during long-term outdoor exposure

Cerakote Corvette Yellow H-144 Thin-film ceramic coating, minimal thickness preserves component assembly tolerances

Cerakote Corvette Yellow H-144 Suitable for decorative and protective coating on automotive parts, engine covers, motorcycle components, fitness equipment, outdoor metal structures, industrial valves, consumer electronics housings, and precision hardware