Skip to main content
中文

FUCHS Gleitmo SFL 9680 K3 Solid Film Lubricant 100ml/瓶

FUCHS Gleitmo SFL 9680 K3 Solid Film Lubricant 100ml/瓶

Overview

FUCHS GLEITMO SFL 9680 / SFL 9680‑TF is a solvent‑based 3‑component air‑drying solid‑film lubricant. SFL 9680‑TF is tin‑free variant with identical performance by using K3‑TF instead of standard K3. Operating temperature:‑70℃~+180℃, short‑term peak up to 250℃. It forms transparent ultra‑thin dry film with very low friction coefficient and good adhesion on rubbers such as NBR, EPDM, VMQ. Resistant to water, mineral oils and fuels, it delivers excellent anti‑stick & release properties to ease assembly of rubber seals. Mainly used for dry lubrication of rubber‑elastomer parts. Mix K1, K2, K3 per specified ratio. Pot‑life after mixing is approx. 5 hours; may dilute with suitable thinner. Apply by spraying or dipping.
Pack sizes
100mlOn request
Application areas
Automotive Steel & Metallurgy Cement & Mining Chemical Processing Electronics & Semiconductor
Get a quote TDS SDS/MSDS

Description

FUCHS GLEITMO SFL 9680 / SFL 9680‑TF is a solvent‑based 3‑component air‑drying solid‑film lubricant. SFL 9680‑TF is tin‑free variant with identical performance by using K3‑TF instead of standard K3. Operating temperature:‑70℃~+180℃, short‑term peak up to 250℃. It forms transparent ultra‑thin dry film with very low friction coefficient and good adhesion on rubbers such as NBR, EPDM, VMQ. Resistant to water, mineral oils and fuels, it delivers excellent anti‑stick & release properties to ease assembly of rubber seals. Mainly used for dry lubrication of rubber‑elastomer parts. Mix K1, K2, K3 per specified ratio. Pot‑life after mixing is approx. 5 hours; may dilute with suitable thinner. Apply by spraying or dipping.

Applications

FUCHS GLEITMO SFL 9680 / 9680‑TF is a 3‑component dry‑film lubricant with excellent lubricity and high coating wear resistance. SFL 9680‑TF is the tin‑free grade; only K3 is replaced by K3‑TF while all performance remains identical. Mix K1, K2 and K3 per official ratio. Viscosity can be adjusted with suitable thinner. Use the mixed material within 5 hours. The coating air‑dries at ambient temperature. Bake at 100‑150℃ for enhanced mechanical strength and chemical resistance. It is designed for dry lubrication of rubber elastomers to reduce friction and improve press‑fit assembly of rubber seals and elastomer parts, widely used for silicone seals and battery flange seals in new energy vehicles.

Product photos

FUCHS Gleitmo SFL 9680 K3 Solid Film Lubricant 100ml/瓶

Technical data

Technical data for this item is being compiled. Use “Request TDS” on the right for the full datasheet.

Pack sizes

Spec code Pack sizeContainer MOQAvailability
Gleitmo SFL 9680 K3 100ml Bottle On request

Application areas

More from this brand

More in this family

View all products from this brand